 |
All TEKNA machines are equipped with a fixed surface made of high quality cast iron.
|
|
The speed gear and belt replacement opening is equipped with an electromechanical safety interlock in accordance with current regulations and created on the work surface to make operations easy and immediate. |
|
The control panel has controls tilted towards the operator making all keys dedicated to the various movements easy to reach and the display of main and scorer blade positions are always clear and distinct. |
|
The control panel is constructed with a scratch-proof and oil-repellent polycarbonate membrane. |
|
The cradle geometry was studied and tested with the most advanced techniques to optimise dust suction and evacuation capacity. |
|
The generous thickness guarantees total stability and the full absence of vibrations in all cutting conditions. |
|
Blade protrusion is 155 mm |
|
(0°) Blade lifting and scorer adjustments are electrical, blade tilt is manual using the hand wheel on the front part of the machine. |
|
Tilt is read on a wide gravitational display. |
|
The carriage unit with 440x3200 mm dimensions is made of anodised aluminium. |
|
Sliding occurs through a ball system on prismatic guides made of tempered and rectified steel. |
|
The guides are secured to the carriage structure and sub-carriage with mechanical riveting technology. Made with an anodised aluminium profile supported by cast iron. |
|
The fencing frame is supported by an enhanced rigidity “telescopic swinging support”. |
|
The 67mm high fence with 2 die-cast aluminium stops is the best compromise between rigidity and agility, precision and ease. |
|
The anodised aluminium goniometer and mechanical scoring of angle references allows for quick positioning at 5°, 10°, 15°, 20°, 22.5°, 30° and 45°. |
| |
|
| Optional |
| |
Parallel guide with electronic programmer |
 |
| |
Post-forming |
 |
