| Features: |
|
|
| |
|
Help
your dust extractor breathe easier...
and the benefits will come back to
you |
 |
An
Anti Static Pleated Filter
System will economically
regenerate your struggling dust
extractor to its maximum performance
and assist you in providing
a cleaner, healthier working
environment, saving you money
in efficient running cost. More
Info Click
Here |
|
| |
| Filter
Efficiency |
|
It is a well
known fact that the air capacity
of a dust extractor is controlled
by the performance characteristics
of the top filter bag. The best
filter medium available can
be reduce in efficiency by up
to 60% by fine dust impinging
or blinding the pores of the
woven material.If air cannot
pass through the filter, the
bag simply becomes pressurized
and inflates. Hard filter
bags do not breath effectively.
Air cannot escape, creates back
pressure against the fan and
reduce the amount of dust laden
air that can be drawn into the
machine. Reduction in airflow
means the dust is
not being collected at the source
so, the whole dust extraction
exercise becomes ineffective
despite the best efforts of
the fan and motor, resulting
in excessive cost in wasted
electricity. |
|
| |
| The
Solution |
|
The
latest technology and the answer
to the problem is high efficient,
PTFE impregnated, non-woven
polyester material, formed into
a cylindrical, pleated filter
canister.This configuration
provides a greater filter area
(by a factor of up to 7 times)
relative to a standard filter
bag, ensuring a large throughput
of air from the fan. These anti
static filters are efficient,
in that they can withstand fine
material down to 3 microns (3/1000mm).
Example: Pollen = 7 microns.
Dust particles under 100 microns
float around in the air and
can not be seen.Standard
dust extraction units are supplied
with nylon filter bags which
filter dust particles to approximately
30 microns. These stand alone
units are designed to be installed
next to the machine it is extracting
dust from, therefor, the operator
is breathing in the fine dusty
air escaping the filter bags.By
installing a new or upgrading
your existing unit to a pleated
filter cartridge system, you
will not only save on running
cost, but on expensive sick
leave having a cleaner air environment. |
|
| |
| Maintenance |
|
Cleaning
of the pleated filter is performed
from the outside by rotating
the internal filter brush 3
revolutions in both directions.
The displaced material falls
inside into the collector bag
and does not contaminate the
outside air.
Click
here for more information |
|
| |
| Service
Life |
|
The
service life of a pleated filter
is dramatically longer than
a conventional filter bag so
your investment is a "one
off" for a minimum period
of 5 years, (subject to correct
operation and treatment of the
system). |
|
| |
| Material
Collection Bags |
|
Most
portable dust extractors utilise
either impervious (non breathing)
collector bags or nylon filter
style units to hold extracted
products prior to transferring
to the industrial bin for disposal.Emptying
of these collector bags usually
results in the operator being
covered in a dangerous quantity
of dust and wood product. In
addition, we have reason to
believe that council authorities
and environment protection agencies
are now paying particular attention
to wood product dumped loose
into industrial bins. |
|
| |
| Cost
Effective Disposable Bags |
|
As
we can now provide efficient
filter mediums to the top bag
position, we can now provide
an economical, disposable, polyethylene
collector bag to hold and seal
these wood products in a suitable
form for disposal. The strong
collector bags fit snugly onto
the existing diameter extractor
hoop on most commercial units
and fix into position with existing
bag clamp. |
|
| |
| |
| Terminology
Used |
| |
|
