Gregory Machinery: Woodworking Machinery

	A handy remote control that can be used to adjust the three speeds, timer and on/off

	Quietly cleans and filters the air in your shop while you work. Filtering 98% of all particles 5 microns in size first filter & 85% of all particles 1 micron in size second filter

Air Filtration Systems

	Use in conjunction with a JET dust collector for maximum dust control.

	Unit comes complete with eyebolts to either hang the machine from the ceiling or to sit on on a workbench.

	System features a convenient built in timer that can be set at 2, 4, or 8 hour increments. Turn the timer on when you enter the shop and forget about it. System will shut itself off at the hour interval you set.

	Constructed of a heavy-duty, powder coated metal box and powerful motor and fan for added durability.

AFS1500

	Features a three-filter system so the optional charcoal filter can be added after the two dust filters to help remove odors from the shop if needed.

	Comes standard with an electrostatic filter that is electronically charged to attract many more dust particles than other standard filters.

	A powerful 1/4HP motor with a large multi fin fan will move high volumes of air to help clear the airborne dust in your shop.

	Three speeds to chose from to accommodate every shop need. (1300, 900, 750 CFM).

	Filters the air in a 20' x 20' x 8' shop in less than 3 minutes or more than 24 times an hour. Filters the air in a larger 40' x 40' x 10' shop in just over 12 minutes or just under 5 times an hour.

	Filters are easily replaceable and require no tools.

	Comes with the necessary hardware to either bolt the unit tight against the ceiling or to hang if from chains. (Chain and ceiling eye bolts not included).

	Overload protection for the motor and the electronic board for extra protection.

	Adjustable exhaust to direct the air where needed.

	The fan spins on a rigid 5/8" shaft with the motor using two full-closed ball bearing assemblies.

Standard Equipment:

	Remote control
	5 micron prefilter
	Electrostatic outer filter
	1 Micron inner filter
	Eyebolts for hanging

Comes with a 2 Year Jet Warranty

Technical Information:

	Motor	1/4 HP, 240V 1HP
	Speeds (CFM)	1300, 900, 750
	Filter Cycle (200 x 200 x 80)	3 minutes
	Cycles per hour	24 times
	Timer Settings	2, 4, or 8 hours
	Outer Filter	5 micron
	Inner Filter	1 micron
	Overall Dimensions (LxWxH)
	Weight

Need more information on this machine? JET*AFS1500

Telephone: Gregory Machinery on (07) 3375 5100

Alternatively: You may wish to complete the following online email form. Once received, Gregory Machinery will respond using the preferred method of contact selected. Please Enter the following information (* Indicates minimum field requirements).

Machine Make & Model

Your Name

Company Name

Email Address

Contact Telephone Number

* Include area code, e.g. 0733755100

Mobile Phone

Preferred Method of Contact

State